Your HOPPE gearbox buyer guide
Questions, answered plainly.
From “will it fit?” to the final test before closing the door. Search a question or choose a topic.
39 questions answered
The problem
Will a new gearbox fix my drooping handle?
It can if the gearbox is the failed component. A loose handle, rubbing spindle or alignment problem can cause similar symptoms. Try the checks on this page, then confirm the lock type and measurements before buying.
My handle wobbles. Is that a failed gearbox?
A loose lever may need its set screw tightened or attention to the handle itself. On a lever with a set screw, check it with a 3 mm hex key. Wobbling alone does not establish a failed gearbox. Compare the symptoms.
It works with the door open, but not closed. What does that mean?
Alignment or interference at the frame or strike plates may be loading the lock. Replacing the gearbox will not correct that alignment. Check the hinges, strikes and door position first. Read the adjustment guide.
The handle clicks or slips. What should I check?
Worn internal parts are one possible cause. Check the handle attachment and compare operation with the door open. Do not force it. If the mechanism still slips or fails to move its locking points, send photos and describe the fault.
Can I do this repair if the door is stuck shut?
The gearbox replacement procedure requires the door to be open. If you cannot open it safely, contact a locksmith or door installer familiar with multipoint locks. Read the stuck-door guidance before attempting to remove parts.
Do I need to replace the whole lock?
If only the gearbox has failed and the surrounding components are compatible and undamaged, the case alone may be enough. Damaged faceplates or extensions can require a larger assembly. Compare gearbox-only and whole-lock repairs.
Will it fit?
Exactly which HOPPE locks does this case fit?
This case is for compatible current-style, manual HOPPE HLS 9000 multipoint locks with a stainless steel faceplate and 3-5/8" (92 mm) handle-to-cylinder spacing. Match the backset and deadbolt throw as well. Use the photo checklist.
My door says Therma-Tru, Kolbe, Sierra Pacific or Simpson. Will it fit?
The door maker and the lock maker can be different companies. A door brand alone cannot confirm fit. Look for the HOPPE stamp on the metal strip in the door edge, then check the operation and measurements. Identify the lock.
My handle says HOPPE. Is that enough?
No. The handle brand alone does not identify the mechanism inside the door. Check the stamp on the faceplate in the door edge and the full compatibility checklist before choosing a gearbox.
Does this replace a single-point lock?
No. A single-point lock has a latch and deadbolt but no additional locking points above or below the handle. Its case is not interchangeable with this multipoint gearbox. See the single-point replacement on Shootbolt.
Does it fit automatic locks, HLS 7 or FUHR?
No. This case is for the compatible manual HLS 9000 system. Automatic, HLS 7, old-style and other-brand mechanisms need separate identification. Ask us to check photos rather than ordering a look-alike.
Does the faceplate width matter?
For a compatible lock in this family, the case can be used with a 5/8" (16 mm) or 3/4" (20 mm) faceplate. You reuse your existing faceplate; this product does not include a new strip.
Do I choose left-handed or right-handed?
The latch is reversible, so there is no left/right choice in this picker. Compare the latch direction with your existing lock and follow the installation guide. Do not force the latch.
Does it fit both sides of a French door?
This gearbox is for a compatible main-door mechanism. The secondary or inactive door can use a different assembly. Check the hardware in the door you are repairing; do not order from the door style alone. Get help identifying it.
Choosing a size
What is backset?
Backset is the distance from the face of the metal faceplate to the center of the handle hole. Choose 1-3/8" (35 mm), 1-3/4" (45 mm), 2-3/8" (60 mm), or 2-3/4" (70 mm) to match your lock. See the measuring photos.
What is deadbolt throw?
It is how far the fully extended deadbolt projects past the faceplate. The picker calls this “deadbolt length” and shows a photo. The choices are 9/16" (14 mm) and 1" (25.4 mm). Measure with the door open and retract all bolts before closing.
What does 45/92/25 mean?
It means 45 mm backset, 92 mm handle-to-cylinder spacing and approximately 25 mm deadbolt throw. In this store the 1" throw is listed as 25.4 mm. The middle number is fixed for this case family; you choose the other two measurements.
Why is only one deadbolt length available for my backset?
The 60 and 70 mm backsets are made with the 1" (25.4 mm) throw only. The picker selects that sole option and tells you. Confirm it matches your old lock. The 35 and 45 mm backsets each have two throw options.
My bare case measures about 43 mm. Which size is it?
The backset reference is the face of the faceplate, not the edge of a bare case. A bare case can read about 2 mm short. Recheck the measurement with that reference; do not round to a nearby size. Send photos if uncertain.
Do I also measure the handle spacing?
Yes, to confirm the lock family: measure from the center of the handle hole to the center of the cylinder hole. It should be 3-5/8" (92 mm). This confirms compatibility; it is not a selectable size in this picker.
The repair
What is included with the gearbox?
One genuine HOPPE lock case with its latch, deadbolt and handle hub. It does not include the faceplate, extensions, handles, spindle, cylinder, strikes or tools. Reuse those components only if they are compatible and undamaged.
Can I keep my handles and existing keys?
Yes, if your existing handles and cylinder are compatible and undamaged. They are removed and refitted during the repair. Reusing your existing cylinder means you keep using its keys.
Can I buy only the little spring or gear inside?
HOPPE does not list the internal springs and gears as individual service parts for this case. This repair replaces the complete case. It does not require replacing every surrounding lock component.
Which tools should I have ready?
A #3 tri-wing bit and hand bit holder, a 3 mm hex key, a Phillips screwdriver and a tape measure. You also need a clear surface for the long lock assembly. Tools are not included with the gearbox. See the tool checklist.
Can a homeowner do the replacement?
Read the complete procedure and judge whether you are comfortable removing and refitting the hardware. The job includes removing the lock assembly, swapping the case and testing all locking points. If the door is stuck or the hardware binds, get experienced help. Read the full installation guide.
How long should I allow?
There is no single time that fits every door. Your experience, screw condition, alignment and access all affect the job. Allow time to compare the parts, refit the hardware and test it. Start only when you can keep the door open while you work.
What if it is still stiff or droops after replacement?
Keep the door open if the lock binds. Check the assembly, screw tightness, handle/spindle interference and alignment using the installation guide. A new gearbox does not cure every handle or door problem. Contact us with photos and symptoms.
Is there a video and a printable guide?
Yes. The HOPPE video shows lockset removal and reinstallation; it does not demonstrate the internal case swap. Our written guide covers the swap. Print the repair checklist to keep the measurements, tools and final tests nearby.
Ordering & delivery
Is it genuine HOPPE, and who sells it?
It is a genuine HOPPE HLS 9000 lock case sold by Shootbolt, LLC, an independent parts retailer in Kansas City, Missouri. Shootbolt is not affiliated with or endorsed by HOPPE.
Why does checkout open Shootbolt?
Hoppemultipointlock.com is run by Shootbolt. You choose the part here and pay through the Shootbolt store. Shootbolt handles fulfillment, order emails and support.
How can I pay? Is tax included?
Shop Pay, PayPal, Google Pay, Venmo and cards are accepted. Prices shown are in US dollars before tax; sales tax is calculated at checkout. Standard US shipping is free.
When will my order ship and arrive?
Your selected part shows its availability and dispatch estimate before checkout. In-stock parts ship in 1 business day for orders placed before 4 pm Central on a business day. Standard delivery usually takes 2–5 business days after dispatch; Alaska, Hawaii and Puerto Rico take longer. Full shipping details.
Where do you ship, and what does it cost?
Standard shipping is free to US addresses, including Alaska, Hawaii and Puerto Rico. Shootbolt does not currently ship to APO/FPO addresses or outside the US. Orders ship with UPS or USPS, and tracking is emailed after dispatch.
Returns & support
What if I ordered the wrong size?
You have 90 days from delivery to return the part. Contact Shootbolt for a prepaid label; there is no restocking fee. Return it clean in its original packaging. For an exchange, start the return and order the correct version. Full return policy.
Can I return it after fitting it?
Yes. Fitting and removing the part is allowed under the current return policy. Return it clean and in its original packaging within the 90-day window. Read all return conditions.
How does the Fit Guarantee work?
Use Shootbolt’s instant part identifier before ordering. If it says a part fits and it does not, Shootbolt pays the return and refunds the part in full, or sends the right part with any price difference settled. Fit Guarantee terms.
Is there a warranty if the part fails?
Manufacturer warranty coverage may apply where the manufacturer provides it. Contact Shootbolt for help with a claim. For a new door, check with the door maker about existing warranty coverage before buying replacement parts.
What should I send for help choosing a part?
Send a photo of the whole strip in the door edge, a close-up of the HOPPE stamp and latch area, and your backset, deadbolt throw and handle spacing measurements. Describe the fault and whether it happens with the door open, closed or both. Send photos for fit help.
How do I reach a person?
Email support@shootbolt.com or call (816) 568-9218, Monday–Friday, 8 am–4 pm Central. Photo inquiries receive an email reply within 1 business day. Contact details.
No matching answer yet.
Try a shorter search, clear the topic filter, or send us your question and photos.
The part
HOPPE HLS 9000 replacement lock case
- Genuine HOPPE part, in six sizes
- Choose your size for price and availability
- Free US shipping and 90-day free returns